Shore Hardness Tester
|
Applications:
SR1510A: test hardness of soft rubber, elastomers, natural rubber products, Neoprene, resin, Polyester, soft PVC, leather, etc.
SR1510B: test hardness of middle hard rubber materials, typewriter rollers, etc..
SR1510C: test hardness of foam plastic and sponge and etc soft material.
SR1510D: test hardness of hard plastic and hard rubber, such as thermoplastic, hard resin, plastic floorboard, bowling.
SR1510DO: test hardness of plastics and middle hard up to hard rubber materials.
SR1510E: test hardness of foam plastic and sponge and soft material, etc.
SR1510O: test hardness of soft elastic materials, print rollers, middle firm textile fabrics, nylon, Orlon, Perlon, Rayon.
SR1510OO: test hardness of sponge and cellular rubber, foam rubber, silicone, gel-like materials.
|
|
Model
|
SR1510A
|
SR1510B
|
SR1510C
|
SR1510D
|
SR1510DO
|
SR1510E
|
SR1510O
|
SR1510OO
|
|
Measurement Range
|
0-100HA
|
0-100HB
|
0-100HC
|
0-100HD
|
0-100HDO
|
0-100HE
|
0-100HO
|
0-100HOO
|
|
Test Scale
|
Shore hardness
|
|
Standard
|
DIN53505, ASTMD2240,ISO7619 JISK7215
|
|
Parameters
|
Hardness result , average value , maxes, value
|
|
Measurement Deviation
|
<1%H
|
|
Resolution
|
0.1
|
|
Communication Interface
|
USB or Bluetooth
|
|
Operating Conditions
|
0°C to 40°C
|
|
Power Supply
|
4x1.5V AAA (UM-4) battery
|
|
Switch
|
Auto switch off
|
|
Battery Indicator
|
Low battery indicator
|
|
Dimensions
|
162x65x38mm
|
|
Weight
|
173g(no probe)
|
|
Standard Delivery
|
Instrument, Test block , English manual and carrying case
|
|
Optional Accessories
|
USB Cable & software, Bluetooth data output
|
Model Informations:
|
Model
|
Indenter
|
Tested Materials
|
Hardness Value
|
|
A
|
0.79 Truncated (Frustum) Cone
|
Soft Rubber, Elastomers, Natural Rubber Products, Neoprene, Resin, Polyester, Soft PVC,Lleather, etc.
|
20 ~ 90 A
|
|
B
|
R 0.1 Cone
|
Middle Hard Rubber Materials, Typewriter Rollers, etc.
|
Above 90 A, Below 20 D
|
|
C
|
0.79 Truncated (Frustum) Cone
|
Plastics and Middle Hard Rubber Materials
|
Above 90 B, Below 20 D
|
|
D
|
|
Fibre Plastics, Hard Rubber, Hard Plastic Materials, Plexiglas,Stiff Thermo Plastics, Formica, Print Roller, Vinyl-plate, Cellulose Acetate, etc.
|
Above 90 A
|
|
DO
|
R 1.2 Spherical Radius
|
Plastics and Middle Hard up to Hard Rubber Materials
|
Above 90 C, Below 20 D
|
|
O
|
|
Soft Elastic Materials, Print Rollers, Middle Firm Textile Fabrics, Nylon, Orlon, Perlon, Rayon
|
Below 20 DO
|
|
OO
|
|
Sponge- and Cellular Rubber, Foam Rubber, Silicone, Gel-like Materials
|
Below 20 O
|
|
E
|
|
Hard Sponge, EVA
|
Above 90 DO, Below 20 D |
|
|
|
|
|
Applications:
Shore Hardness Tester Measurement Stand, can be extended for 100 mm.
|
Test Stand for SR1510 series
Features:
The Shore Durometer Test Stand is R&D for our shore durometer SR1510 series which can make test more stable and accurate. By acting on weight to cause measuring force, let tip of durometer press to test material to an accurate value Shore Durmeter test stand is applied for A Shore Durometer , B Shore Durometer , C Shore Durometer , D Shore Durometer, DO Shore Durometer, E Shore Durometer, O Shore Durometer, OO Shore Durometer.
Operation procedure:
Fix Shore durometer on the test stand through installation pole.
Put hardness block in accessory on glass stage, pressing operating handle under weight of poies to make durometer tip into hole of the block till press foot of durometer touching block completely.At this time,the hardness value on dial should be within ±1 of signed value on the block. If the value is not ±1, please adjust the adjusting nut under glass stage to make value turn to 100±1. If the durometer is without hardness block, pressing operating handle under weight of poies to make durometer tip to glass stage, and touching completely. At this time, the hardness value on dial should be within 100 ±1, if it is not, please adjust the adjusting nut under glass stage to make value turn to 100 ± 1.
Put the test material on the glass stage, drive operation handle under weight of designation weight. When durometer touches test material completely , read the value showed on dial at regular time . Reading value time of thermoplastic rubber is 15 seconds , vulcanized rubber of others unknown rubber is 3 seconds .
Shore C model (Micropore Material Durometer) is within 1 second to read the value after durometer touching the material completely. If adopting other test time, it should be pointed out in test report.
* Notice: The test stand is only applied for our shore durometer. When installing different mode of durometer, please adjust quality of weight first according to requirements.
(1) Under environment without shock, the max pressing speed of test could not above 3.2mm/s.
(2) The requirement and adjustment of the sample are based on the corresponding standard of the sample.
|
|
